beautypg.com

Installation – KROHNE OPTIMASS 8000K EN User Manual

Page 23

background image

INSTALLATION

3

23

OPTIMASS 8000K

www.krohne.com

08/2010 - 4000921002 - MA OPTIMASS 8000k R02 en

3.4.14 Zero calibration

The procedure for zero calibration is contained in the converter handbook. However, the
following information should be considered when installing the meter.

3.4.15 Sunshades

The meter MUST be protected from strong sunlight.

Zero calibration

1 Where the meter has been installed vertically, install shut-off valves either side of the meter to assist with zero cali-

bration.

2 If the process flow cannot be stopped, install a bypass section for zero calibration.

1 Horizontal installation
2 Vertical installation

MA_OPTIMASS_8000k_en_100817_4000921002_R02.book Page 23 Tuesday, August 17, 2010 2:08 PM