KROHNE IFC 050 Converter Quickstart EN - Manual (Page 4)

2
INSTALLATION
4
IFC 050
www.krohne.com 08/2013 - 4002257402 - QS IFC 050 R02 en
2.1 Intended use
The electromagnetic flowmeters are designed exclusively to measure the flow and conductivity
of electrically conductive, liquid media.
2.2 Scope of delivery
WARNING!
If the device is not used according to the operating conditions, the intended protection could be
affected.
INFORMATION!
Inspect the cartons carefully for damages or signs of rough handling. Report damage to the
carrier and to the local office of the manufacturer.
INFORMATION!
Do a check of the packing list to make sure that you have all the elements given in the order.
INFORMATION!
Look at the device nameplate to ensure that the device is delivered according to your order.
Check for the correct supply voltage printed on the nameplate.
Figure 2-1: Scope of delivery
1 Device in the version as ordered
2 Bar magnet (to operate the signal converter when the housing is closed)
3 Documentation (calibration report, Quick Start, CD-ROM with product documentation for measuring sensor and signal
converter)
4 Signal cable (only for remote version)