KANOMAX 6332D Airflow Transducer - Manual (Page 13)

6
Connecting the Probe Cable to the Main Unit
- Make sure to cut the power supply to the main unit before connecting the probe cable (sold
separately).
- The probe cable must be wired separately from the power line.
Match the concave part of the main unit connector with the convex part of the cable connector (4-pin), and
click them in (not a screw type).
Main Unit Connector
Cable Connector (4-pin)
Connecting the Probe Cable to the Probe
- Make sure to cut the power supply to the main unit before connecting the probe and the probe
cable (do not supply power until both are connected).
- Match the concave part of the cable connector (5-pin) with the convex part of the probe connector.
Connect the probe and probe cable by rotating the screw portion of the cable connector.
Cable Connector (5-pin)
(Probe: Model 0963-00 shown for reference）
Ａ
Ａ