Jenway 7305 - Manual (Page 5)

1
Contents
Page
Safety 3
SeCtion 1 - introduction 8
1.1 Instrument description 8
1.2 Instrument specification 8
SeCtion 2 - installation 9
2.1 Unpacking 9
2.2 Installation 9
2.3 Display 10
2.4 Controls 11
2.5 Rear panel 12
2.6 Front panel 12
SeCtion 3 - theory and practice of spectroscopy measurements 13
3.1 Theory of spectroscopy measurement 13
3.2 Spectroscopy measurement 13
3.3 Good practice guidelines 14
SeCtion 4 - instrument setup 16
4.1 Navigating and screen setup 16
4.2 Time and date 17
4.3 Instrument settings menu 17
4.4 Diagnostics 18
4.5 Screen contrast 18
4.6 Lamp save 18
SeCtion 5 - Photometrics 20
5.1 Mode specific parameters 20
5.2 Method set up 20
5.2.1 Selecting a wavelength 21
5.3 Calibration 21
5.4 Sample measurment 21
SeCtion 6 - Concentration 22
6.1 Mode specific parameters 22
6.2 Method setup 22
6.2.1 Selecting a wavelength 22
6.2.2 Settings 23
6.2.2.1 Selecting concentration units 23
6.2.2.2 Changing the resolution 24
6.2.2.3 Using a standard 24
6.2.2.4 Using a factor 24
6.3 Calibration 24
6.3.1 Calibrating to a standard 24
5