Jenway Genova Nano English - Manual (Page 10)

8
SECTION 3 – ACCESSOry SETTINGS
3.1 ACCESSING THE MICrO VOLuME ACCESSOry SETTINGS
When installed, the micro volume accessory icon is displayed in the bottom right hand corner of the
screen in each measurement mode.
The micro volume accessory settings are accessed by pressing the key below the micro volume accessory
icon.
The micro volume accessory settings allow the user to select the required path length for a measurement
and calibrate the accessory using a standard solution with known absorbance values at 260 and
330nm.
Fig 3.1 – Micro Volume Accessory Settings Menu
12
SECTION 3 – ACCESSORY SETTINGS
3.1 ACCESSING THE MICRO VOLUME ACCESSORY SETTINGS
When installed, the micro volume accessory icon is displayed in the bottom right hand corner of the
screen in each measurement mode.
The micro volume accessory settings are accessed by pressing the key below the micro volume
accessory icon.
The micro volume accessory settings allow the user to select the required path length for a
measurement and calibrate the accessory using a standard solution with known absorbance values at
260 and 330nm.
Fig 3.1 – Micro Volume Accessory Settings Menu
0.2mm Path Length
Setting
A
260
Calibration
Standard Value
Tick icon
0.5mm Path Length
Setting
Auto Path Length
Setting
Path Length
Calibration
Micro Volume Accessory
icon
Current Calibration
Factors
Accessory
Alignment Mode
A
330
Calibration
Standard Value
Calibration Standard
Path Length Value
Micro Volume Accessory icon
12
SECTION 3 – ACCESSORY SETTINGS
3.1 ACCESSING THE MICRO VOLUME ACCESSORY SETTINGS
When installed, the micro volume accessory icon is displayed in the bottom right hand corner of the
screen in each measurement mode.
The micro volume accessory settings are accessed by pressing the key below the micro volume
accessory icon.
The micro volume accessory settings allow the user to select the required path length for a
measurement and calibrate the accessory using a standard solution with known absorbance values at
260 and 330nm.
Fig 3.1 – Micro Volume Accessory Settings Menu
0.2mm Path Length
Setting
A
260
Calibration
Standard Value
Tick icon
0.5mm Path Length
Setting
Auto Path Length
Setting
Path Length
Calibration
Micro Volume Accessory
icon
Current Calibration
Factors
Accessory
Alignment Mode
A
330
Calibration
Standard Value
Calibration Standard
Path Length Value
0.2mm Path
Length Setting
0.5mm Path
Length Setting
Auto Path
Length Setting
Path Length
Calibration
Current Calibration
Factors Accessory
Alignment Mode
Tick Icon
A
260
Calibration
Stanadard Value
A
330
Calibration
Stanadard Value
Calibration
Standard Path
Length Value