HT instruments THT70 - Manual (Page 51)

THT70
EN - 49
7.2.2 Recharging by connection to the recharging base
1. Connect the provided battery charger to the AC mains and the recharging base. The
green “Power” LED on the base turns on.
2. Insert the battery into the recharging base provided, paying attention to the insertion
direction and blocking the battery with the relevant selector. The red “Charge” LED on
the base turns on.
3. Carry on the recharging process until the “Charge” LED turns off.
4. Remove the battery, disconnect the recharging base and the battery charger from the
electric mains.
7.3 CLEANING THE INSTRUMENT
Use a soft and dry cloth to clean the instrument. Never use wet cloths, solvents, water, etc.
7.4 END OF LIFE
CAUTION: this symbol found on the instrument indicates that the appliance, its
accessories and the batteries must be collected separately and correctly
disposed of.
7.5 ACCESSORIES
7.5.1 Accessories
provided
 Focal lens for IR measurements f= 22mm
 Lens protection cap
 Rechargeable Li-ION battery, 7.4V 2700mAh, 2 pieces
 AC/DC
100-240V/12V adapter + universal plugs
 Battery recharging base
 Micro SD card, 4GB
 Adapter for micro SD card
 USB
cable
 RCA video cable
 Set of headphones for intercom
 Support for display protection
 Support for tripod
 CD-ROM with Windows software THTLink
 ISO9000 calibration certificate
 Quick reference guide
 User manual on CD-ROM
 Rigid transport bag
7.5.2 Optional
accessories
 Focal lens for IR measurements f= 11mm, FOV: 47.1° x 36.2°
 Focal lens for IR measurements f= 38mm, FOV: 14.4° x 10.8°