HT instruments THT70 - Manual (Page 32)

THT70
EN - 30
5.2.3 Image menu
By touching the icon the “Image” menu is entered, in which it is possible:
 To set the display type of the IR and visible image on the display
 Define the colour palettes associated with the IR image
 Set the temperature level of the image and the image mode
 Define the characteristics of the Isotherm line tool
5.2.3.1 Setting the display type
In the Image menu, by touching the icon “ ” it is possible to define the type of desired
display by choosing between the following options:
 IR  display of IR image only (see Fig. 41)
 Visible  display of visible image only (see Fig. 42)
 IR_FUSION_VIS  Display of visible image within the IR image, with the possibility of
choosing the position to the sides of the display (see Fig. 43).
 VIS_FUSION_IR  Display of IR image within the Visible image, with the possibility of
choosing the position to the sides of the display (see Fig. 44).
 IR_MIX_VIS  Display of visible image in the middle of the screen/full screen of the IR
image with the possibility of choosing the percentage value of the visible level (see Fig.
45).
 VIS_MIX_IR  Display of IR image in the middle of the screen/full screen of the visible
image with the possibility of choosing the percentage value of the IR level (see Fig. 46).
Fig. 41: Setting and displaying the IR image
Fig. 42: Setting and displaying the visible image