HT instruments QUICKLAN6055 - Manual (Page 10)

QUICKLAN 6055
EN - 9
6. MAINTENANCE
6.1. GENERAL INFORMATIONS
1. This model is a precision instrument. Whether in use or in storage, please do not
exceed the specification requirements to avoid possible damages or dangers
2. Do not place this meter at high temperatures or humidity or expose it to direct sunlight
3. Be sure to turn off the meter after use. If you expect not to use the tester for a long
time, remove the battery in order to avoid leakages of battery liquid that would damage
the internal parts
6.2. BATTERY
REPLACEMENT
When “ ” appears on the display, replace the battery.
CAUTION
Only skilled technicians can open the instrument and replace batteries.
Before removing batteries disconnect the test leads from any energized
circuits to avoid electrical shocks.
1. Switch off the instrument and remove the cable from the input socket.
2. Press the battery cover and push in the direction of the arrow to open.
3. Remove the battery.
4. Replace the battery with a new one of the same type (refer to § 7.2) observing the
proper polarities.
5. Replace the battery cover.
6. Use the appropriate battery disposal methods for your area.
6.3. CLEANING
To clean the instrument use a soft dry cloth. Never use a wet cloth, solvents or water.
6.4.
END OF LIFE
CAUTION: this symbol indicates that equipment and its accessories shall be
subject to a separate collection and correct disposal.