Accusys RAID Controller ACS-77100 - Manual (Page 26)

http://www.accusys.com.tw 25
User’s Manual
7. Type in the command “download” to go to the firmware download mode, then type “1” to
download code (Firmware or Bootcode).
>>> download
restart … 01 GPIO 01 AAA 01 01
========= 76 Download Mode =========
Enter ‘1’ to Download Code (Firmware, Bootcode)
‘ESC’ exit
‘r’ reset
--------------------------- version: Boot ---- 13 (a) ---- 03 Downloading Code!
Flash type: SST39VF040
8. Locate the updates firmware file to send. For HyperTerminal, go to the Transfer menu and
select Send Text File.
9. Send the firmware file as a text file. The file will start to download.
Caution
Do not turn off the system or interrupt program
during firmware-updating procedure.
10. When the file has been downloaded, after ACS-77100 restarted, the firmware-updating
procedure is finished.