Detcon AV1-C1D2C - Manual (Page 6)

6
1 . 1 I N S T ALLATI O N
STROBE
1.1.0 The assembly can be mounted by using the two mounting holes located on the sides of the
horn or the four mounting holes on the 4-way condulet located below the horn. Additional
mounting concepts may consist of utilizing brackets, U-bolts, or a combination of the two.
1.1.1 Connect wiring in accordance with the drawing in the illustration that follows. To determine
the proper voltage of the strobe and siren, refer to the specifications label on the alarm system
enclosure.