Detcon SW-AV1-DV2 - Manual (Page 10)

SW-AV1-DV2
SW-AV1-DV2 Instruction Manual Rev.0.4 Page 6 of 8
Gnd
Alarm Term Bd.
Strobe
DB3 PCA
White/Violet
White/Green
White/Blue
White/Brown
White/Black
Wireless
Transceiver
Brown
Black
G
re
en
Black
Red
G
re
e
n
/Y
e
ll
o
w
Red
Black
Red
Green
Orange
External
24VDC
Input
24V Return (-)
24VDC (+)
Figure 8 Typical Unit Wiring
3.0 Operation
The Wireless C1D2 Alarm Stations provide a strobe and a horn, two strobes, or a single horn. The wireless
alarm station is set to respond to alarms from the controlling unit.
The controller/wireless network has
independent control over the strobe and the Horn, and they will be activated when the appropriate alarm is
activated.
All strobes have a flash rate of 1 Hz (one flash per second). This is preset by the manufacture and cannot be
modified.
The horn has up to 32 possible settings, for use in different configurations. The default setting of the horn is
factory set. To change the setting of the horn, remove the rear end of the horn, and set dip switches according
to the Sound Signals Table.