DeFelsko PosiTector UTG v.3.0 Quick Guide - Manual (Page 12)

11
Auto SYNC 
Allows the instrument to automatically synchronize with
PosiTector.net when initially connected to an internet connected
PC running PosiTector Desktop Manager.
Additional measurements added to memory while connected are
synchronized only when the USB cable is disconnected, then
reconnected or when Connect>Sync Now is selected.
Immediately initiates synchronization with PosiTector.net when
connected (USB or Bluetooth) to an internet connected PC
running PosiTector Desktop Manager.
Sync Now
Connect Menu Connect Menu
The instrument uses a USB mass storage device class which
provides a simple interface to retrieve data in a manner similar to
USB flash drives, cameras or digital audio players.
USB Drive 
When connected, power is supplied through the USB
cable. The batteries are not used and the body will not
automatically power down. If rechargeable (NiMH) batteries are
installed, the instrument will trickle charge the batteries.
NOTE:
Allows individual readings to be sent to a computer or compatible
device as they are taken using Bluetooth wireless technology.
See www.defelsko.com/bluetooth
Bluetooth
(Advanced models only)
The instrument may perform a Hard Reset (pg. 8)
Updates
Determines if a software update is available for your instrument.
Must be connected to an internet connected PC running
PosiTector Desktop Manager. See www.defelsko.com/update
NOTE: