DeFelsko PosiTector DPM v.3.1 Quick Guide - Manual (Page 6)

5
Advanced models store 20,000 datasets in up to 1,000 batches.
“New Batch” closes any open batch and creates a new batch name
using the lowest available number. The icon appears. New
batch names are date stamped when they are created.
Auto Log Mode Auto Log Mode
Memory Management Memory Management
The PosiTector DPM has internal memory storage for recording
measurement datasets. Stored datasets can be reviewed
on-screen or accessed via computers, tablets and smart phones.
Datasets are date and time-stamped. Datasets can be stored
manually (using the (+) button), or automatically using the Auto
Log mode (Page 5).
Standard models store up to 2,500 datasets in one batch.
The PosiTector DPM can automatically display and record
datasets at user selected time intervals. When selected, the Auto
Log icon will appear on the display, with a countdown timer
until the next reading. Connect the instrument to a USB power
source for long-term use.
Turn on instrument/
Cancel Auto Log
mode
Scroll through
display modes
(Advanced only)
Screen Capture
Press both (-)(+) buttons at any time to capture and save an image
copy of the current display. The last 10 screen captures are stored
in memory and can be accessed when connected to a computer
(see PosiSoft USB Drive pg. 6).
Scroll through display
modes (Advanced only)
Delete last reading
Access the Menu
Store a dataset in memory
(Advanced only)
Restore brightness after
dimming (Advanced only)