DeFelsko PosiTector SPG v.1.1 Quick Guide - Manual (Page 8)

8
Auto SYNC
When selected, Gage immediately synchronizes stored
measurement data via USB, Bluetooth or WiFi to PosiSoft.net.
(PosiSoft Desktop Manager and an internet connection are
required when using USB or Bluetooth.)
Sync Now
Connect Menu Connect Menu
The Gage uses a USB mass storage device class which provides
a simple interface to retrieve data in a manner similar to USB flash
drives, cameras or digital audio players.
USB Drive
When connected, power is supplied through the USB
cable. The batteries are not used and the body will not
automatically power down. If rechargeable (NiMH) batteries are
installed, the Gage will trickle charge the batteries.
Allows individual readings to be sent to a computer, printer or
compatible device as they are taken using Bluetooth wireless
technology. See www.defelsko.com/bluetooth
Bluetooth
(Advanced models only)
The Gage may perform a Hard Reset after an
update (see pg. 5)
Updates
Determines if a software update is available for your Gage.
See www.defelsko.com/update
Allows wireless communication with devices such as tablets,
smart phones and computers connected to your local wireless
network or portable mobile hot spot. See www.defelsko.com/WiFi
WiFi
(Advanced models only)
NOTE:
WARNING:
Allows the Gage to automatically synchronize with PosiSoft.net
when initially connected to the internet via a PC running PosiSoft
Desktop Manager or a local WiFi network.
Additional measurements added to memory while connected are
synchronized only when the USB cable is disconnected, then
reconnected or when the Sync Now option is selected.