Catskill Craftsmen 54228 - Manual (Page 11)

STEP 10
A. Lay the cart on it’s back. Insert and tap caster sockets with hammer until the teeth grab the wood.
DON’T POUND SOCKET FLAT OR CASTER SHAFT WILL NOT ENTER.
B. Insert casters and seat by pushing straight
downward with heel of your hand, or tap into
place with a hammer. Don’t be afraid to give
them a good downward whack on the solid
metal part of the caster!
C. Locking wheels usually go on front.
STEP 11
A. Upright unit.
B. Determine if you want the Spice Rack on the left or right Side Panel. The Handle/Towel Bar will
go on the other. Then attach the Spice Rack to the Side Panel with two 1” #8 screws from inside
the panel. Place
a washer over the
screw so that so
that the head won’t
pull through the side
panel. Use the pilot
holes in the top
shelf of spice
rack.
C. Attach Towel
Bar to the other
Side Panel with
1” #8 screws from
inside the Side Panel.
Place a washer over
each screw.