Catskill Craftsmen 54228 - Manual (Page 10)

No pilot holes as softwood.
5/8” Pan Head Screws
STEP 9
Magnet
A. Stick magnet to magnet plate on a door.
B. With all other doors open, close the door. The magnet should be positioned over the wooden block
on the bottom of the top front brace. Hold the magnet in place with your thumb, and open the door.
The magnet will be in the correct position on the block.
C. Secure magnet with the two pan head screws in the magnet packet. Center screws in the slot in
the magnet. This will allow adjustment later, if needed.
D. Repeat these steps for all the doors.
Note: You may find it easier
to lay the unit on it’s back.