Catskill Craftsmen 7222 - Manual (Page 4)

STEP 1
Either
D1
Drawer Assembly:
Tap in post with a hammer to start and
screw down with a screwdriver or with
a small allen wrench until the shoulder
of the post hits the wood. Then unscrew
until the hole is parallel with the slot on
the bottom of the Drawer Front.
To understand how the bastion fastening
system works see next page or view
the video on our website
www.catskillcraftsmen.com
1 1/4” #8
1” Machine Screw
5/8” #5
D1
D2
D3
D4
D5
Set Screw
Barrel Nut
Drawer Bottom Slot