Catskill Craftsmen 7222 - Manual (Page 11)

STEP 8
1. Stick magnet to magnet plate on right door.
2. With left door open, close the right door. The magnet
should be positioned over the wooden block on the bottom of the
top front brace. Hold the magnet in place with your thumb, and
open the right door. The magnet will be in the correct position on
the block. Mark holes with pencil thru slots, make pilot holes with
a nail or screw.
3. Secure magnet with the two round head screws in the magnet
packet. Center screws in the slots in the magnet.
This will allow adjustment later, if needed.
NOTE: No pilot holes in block, as softwood!
5/8” #6 Pan Head Screw
SP
1” Machine screw