Catskill Craftsmen 1580 - Manual (Page 7)

STEP 5
A. Turn the side/back assembly ( from step 3 )
upside down ( invert ) on top of the inverted table top.
B. Drop two 1-1/4” # 8 screws into the holes in
each of the table top sticks.
C. Using the (+) marks from step 4 as a guide,
insert the tips of the screws into the pilot
holes in the unit top and finger tighten.
When all 4 screws are properly aligned,
tighten down.
1 1/4” Phillips Flat Head #8 Screw
4 Used in this step