Avigilon RS2 Access It Integration - Manual (Page 7)

Avigilon Control Center System Integration Guide with RS2 Access It!
3
Configuration
Assigning Logical IDs to Cameras
In the Avigilon Control Center Client software, assign a logical ID to each camera. The Access It!
software will only detect cameras with a logical ID. By default, cameras do not have a logical ID.
1. In the Avigilon Control Center Client software, right-click a camera in the System
Explorer and select Setup.
2. In the camera Setup dialog box, click General.
3. In the General settings dialog box, enter a Logical ID for the camera.
The logical ID must be unique number.
Adding an Integration User in Avigilon
To protect the security of the Avigilon Control Center Server, add a user to the Avigilon software
specifically for connecting to the integration. See the Avigilon Control Center Client User Guide
for details about how to add users.
This user must have the following permissions to enable all the integration features:
• View live Images
• Use PTZ controls
• View recorded Video
The Avigilon RS2 integration username and password is required to link the Avigilon Control
Center system with the RS2 Access It! system.
Enabling the Integration in Access It!
To use the integration, you must enable the DVR integration option in each Access It!
workstation.
• In the Access It! workstation software, open the Edit Workstation dialog for the
workstation that will use the integration and select the Enable DVR Integration for
this Workstation option.