Avigilon ACC Gateway Version 5.2 - Manual (Page 19)

Live Export
13
5. (JPEG images only) In the Image Quality drop down list, select the export quality level.
6. Set the export image rate:
o Select Full to export the live video stream at the camera’s full image rate.
o Select One image every to control the time between each exported image. For
example, if you enter 0 min 5 sec, one image will be exported every 5 seconds.
7. To limit the amount of images that are exported, enter a number into the Maximum number of
images to store field. The default number is 200 images.
Be aware that if you leave the field blank, the live export will continue until there is no
more available storage.
8. Select any of the listed image overlays to include that information on the exported images.
9. If you only want to export part of the camera’s field of view, click Region of Interest .
In the expanded image panel, move and resize the green overlay to highlight the area
you want to export. Only the area covered by the green overlay is exported.
10. When you are ready, click Start .
The export will run until the maximum number of images is reached, or you click Stop .
The exported images are automatically saved to the Avigilon Control Center Gateway img folder.
The folder is typically located here:
C:\Program Files\Avigilon\Avigilon Control Center Gateway\img