Aposonic A-S1602R20B - Manual (Page 31)

- 31 -
5.5 Backup Device
In Menu display, press ▲▼◄► to change the highlighted option to Backup Device,
and then press ENTER to call up Backup Device display as shown below.
The system supports a variety of USB 2.0 storage devices, including Storage Disk
such as USB 2.0 storage disk drives and
DVD Disc (including DVD+RW, DVD+R,
and DVD-R) . (DVD-RW is not supported.) The operations are as below:
„
▲▼◄►
Press these buttons to select the items.
„
ESC (Mouse: Right Click)
Press this button to escape from this screen, and return to previous display.
„ Connect/Disconnect – If the specific backup device is disconnected (as shown in
Current Status), please plug the USB device in one of the USB ports of the system
and/or insert a DVD for DVD device, and then press ENTER
(Mouse: Left
click) to command the system to connect with the device. If the specific device
is already connected (EX. Read/write, as shown in Current Status), please press
ENTER
(Mouse: Left click) to command the system software to disconnect
with the device, and then unplug the backup device from the backup port.
Note 1:
Please DO NOT format the DVD disc for better performance and
compatibility.
Note 2: Before using USB pen drive, please format it to FAT32 file system by
MS-Windows.
Note 3: The backup device has to be connected by the system software before it
can be used to read/write. If it failed to connect, please unplug the