Aposonic A-S0404R13A User Manual
Page 34
35
F. System Information
F-1. DVR Name
Use the virtual keyboard to insert the name of the DVR.
F-2. DVR ID
Use ◄ or ► to setup the DVR ID. The adjustment value is between 0~32
F-3. Language
Use the drop down list to change the DVR language. Currently, there are
English, Traditional Chinese and Simplified Chinese three options.
F-4. Date Format
Use the drop down list to change DATE. There are DD/MM/YYYY,
YYYY/MM/DD and MM/DD/YYYY three modes.
F-5. Video System
Use the drop down list to change system type, NTSC or PAL. Moreover,
DVR will reboot while changing the system type.
G. Monitor Output Setup
User can use ◄ or ► to adjust the monitor related setting within this page, there
are “Brightness”, “Contrast”, “Hue”, “Sharpness” and “Saturation” five options can
be set.
Note: When you choose PAL to NTSC or NTSC to PAL, please go to “System
Setup” -> “Configure Setup -> enable “System Setup” and Load Default the
default value. NTSC and PAL monitor output default value was different.