Additel 920 Pneumatic High Pressure Test Pump Datasheet - Manual

Pressure / Process Calibration Equipment
Additel Datasheet 2014 / 2015
Corporate Headquarters
22865 Savi Ranch Parkway Ste F
Yorba Linda, CA 92887, USA
Salt Lake City Office
802 Bamberger Dr, Suite C
American Fork, UT 84003, USA
Phone: 714-998-6899
Fax: 714-998-6999
Email: [email protected]
Phone: 801-756-5570
Fax: 714-998-6999
Email: [email protected]
High Pressure Test Pump
Additel 920
OVERVIEW
The 920 High Pressure Test Pump is a hand operated pressure pump designed to generate pressure from 95%
vacuum to 3,000 psi (200 bar). With a long lever, it just takes 40 seconds to reach 3,000 psi (200 bar). A high-
quality screw press is designed for fine pressure adjustment, with an adjustment resolution up to 10 Pa (0.1 mbar).
A specially designed shut-off valve makes the pressure as stable as possible during calibration. A built-in gas-liquid
isolator protects the pump from moisture and dirt to reduce the need for maintenance. The residual liquid in the pump
introduced from devices under test will be pushed out and collected during pressure release. Two hand-tight quick
connectors installed on the pump allow easy connecting and disconnecting to the test pump without the need for PTFE
tape or wrenches. The 920 is an ideal comparison test pump for pressure instruments calibration.
High Efficiency
Generate 3,000 psi (200 bar) in 40 seconds.
Adjustment Resolution
0.001 psi (10 Pa, 0.1 mbar).
High-quality screw press for fine pressure adjustment.
Great Stability
A specially designed shut-off valve makes the
pressure as stable as possible during calibration.
Durable and Minimal Maintenance
Built-in gas-liquid isolator protects the pump from
moisture and dirt.
The residual liquid in the pump introduced from
devices under test will be collected and then pushed
out and collected during pressure release.
Anticorrosive and wear resistant material are used to
improve the reliability further.
Hand-tight Quick Connectors
Allows easy connecting and disconnecting to the test
pump without the need for PTFE tape or wrenches.
Media: Air.
Generated Pressure Range
95% vacuum to 3,000 psi (200 bar) positive pressure
Adjustment Resolution: 10 Pa (0.1 mbar/0.0015 psi)
Material: Ram/adapters: SS
Body: SS/aluminum
Seals: Buna-N, F357
Connection
Hand-tight connectors for both test gauge and
reference gauge.
Test Gauge Connection: 1/4NPT female, 1/2NPT
female, 1/4BSP female, or M20X1.5 female
Reference Gauge Connection: 1/4NPT female,
1/2NPT female , 1/4BSP female, or M20X1.5 female
Dimensions:
Height: 7.00'' (178 mm);
Base: 21.26' (540 mm) x 10.63'' (270 mm).
Weight: 14.3 lb (6.5kg).
Warranty:: 1 year
FEATURES SPECIFICATIONS
Optional Accessories
Model number Description
ADT102
Adapters and fittings, 1/4NPT male to various male and female connection
(25 pcs). More information shown on page 53.
ADT103
Adapters and fittings, 1/4NPT (1/4BSP, or M20X1.5) male to various
female hand-tight quick connectors (10 pcs). More information shown on
page 54.
ADT100-HTK
Hose test kit, 5 feet flexible hose, 15,000 psi, 1/4NPT male to 1/4NPT
(1/8NPT, 1/2NPT, 1/4BSP, or M20X1.5) female hand-tight quick
connector. More information shown on page 55.
9909-920 Carrying Case for one 920 pump and two 681 gauges or 672 calibrators
ADT920-MK Maintenance kit for Additel 920 pump
ORDERING INFORMATION
Accessories included
O-ring: 20 pcs
Manual: 1 pc
Pressure port type:
N-
1/4NPT female
N2- 1/2NPT female
B-1/4BSP female
M-M20X1.5 female
Model
ADT920 N
Model Number
Generate 95% vacuum to 3,000 psi (200 bar) pressure
Generate 3,000 psi (200 bar) in 40 seconds
Minimal maintenance
Hand-tight quick connectors
First one in the world
NEW