Additel LogII User Manual - Manual (Page 3)

3 / 12
Chapter One: Overview
1. Introduction
Additel/LogII is specially designed to collect real-time data of pressure units under test
(UUT). It is a necessary software in pressure data logging.
The features of Additel/LogII:
 It can automatically scan pressure gauges connected to the computer.
 Graphical interface can display the real-time pressure value and draw the curve for
UUTS.
 Supports multiple instruments under test at the same time.
 To store pressure value according to the defined time.
 Supports data exporting in 3 formats.
 Multilingual user interface.
2. System Requirements
Hardware Requirements
CPU： Intel Pentium III (At least)
Memory：1GB (At least)
Hard Disk free space：2GB (At least)
Hardware must has serial port
Software Requirements
Operating System：
Windows XP/Windows 2003/Windows Vista/Windows7/Windows8
3. Software Installation
First, Open the file Setup.exe to start the installation.
Second, Install driver will detect whether the following components are installed in system
or not. If not, they will be installed automatically; otherwise it will be skipped.