WEN 70751 10 Dual Bevel Sliding Compound Miter Saw - Manual (Page 3)

3
Specifications
Model Number
70751
Input Power 120V, 60Hz, 15A
No Load Speed 5000 RPM
Blade Size 10" x 5/8" bore
Number of teeth 40
Miter Table Angles 0° to 60° (L), 0° to 50°(R)
Bevel Cuts 0° to 45° (L&R)
Cutting Capacity
Straight cut
at 0° miter, 0° bevel: 3 3/8x12”
Miter cut at 45° miter, 0° bevel: 3 3/8x8 1/2”
at 52° left miter, 0° bevel: 3 3/8x6”
at 52° right miter, 0° bevel: 3 3/8x7 5/8”
Bevel cut at 0° miter, 45° right bevel: 1x 12”
at 0° miter, 45° left bevel : 2x 12”
Compound miter cut
at 45° right miter, 45° right bevel: 1x8 1/2”
at 50° right miter, 45° right bevel: 1x7 5/8”
at 45° left miter, 45° left bevel: 2x8 1/2”
at 52° left miter, 45° left bevel: 2 1/4x6”
Laser type LDBXQ03B
Laser class Class IIIa
Laser wave length 650nm
Laser Max. output <5 mW
Weight 49.5 lbs
Included
The Apex Pro™ 10" Dual Bevel Sliding Compound Miter Saw is supplied with the following accessories as
standard:

Saw blade (installed)

Hold down clamp

6 mm hex key

2 material support arms

Dust collection bag

Instruction manual