Walker Magnetics CER SERIES - Manual (Page 18)

18
O.S. Walker Inc., CER Lift Magnet
For repair of your lift magnet, contact O.S. Walker for you’re nearest Authorized Service
Center TOLL FREE at 1-800-W-MAGNET. A return material authorization number will
be issued along with the address of the nearest Authorized Service Center. Your mag-
net, after receipt by the Service Center will be inspected and a free estimate of repair
charges will be provided. Authorization for repairs from magnet owners must be given to
the O.S. Walker Service Center before repairs are made. Transportation charges, both
to and from the factory, are to be paid by the magnet owner.
This product is manufactured in accordance with ANSI/ASME B30.20
For further information, refer to Chapter 20-3 Close Proximity Operated Lifting Magnets.
*Walker replacement parts may be installed by a **Designated Person.
** Designated Person - A person selected or assigned by the employer as
being competent to replace specific replacement parts listed in this manual and
is able to verify the proper functioning of the specific replacement parts and the
entire product after the completion of the installation.
 Disassembly or repair of this magnet can result in reduced hold-
ing power and/or cause an unsafe condition. Therefore, anytime
the magnet is disassembled beyond the parts list shown in this
manual, the magnet must be re-tested for breakaway force in
accordance with the test described in ANSI/ASME B30.20.
 Modification of any operating mechanism or structure of this
magnet can reduce the magnet’s effectiveness and/or cause
unsafe conditions.
 Repair or modification of this magnet should only be done by
O.S. Walker.*
WARNING
REPAIRS