Triton RL5000 Installation Manual - Manual (Page 53)

5 3
a. Access the Managment Functions
main menu screen. Refer to the
Model RL5000 User manual for
instructions on accessing the
Management Functions main
menu.
b. Select Diagnostics from the
Management Functions screen,
then Dispenser.
c. Select the Test Dispense option.
Select either individual cassettes
that are installed (“A”, “B”, “C”,or
“D”) or “ALL CASSETTES ”. A
prompt appears asking how many
notes to dispense. (Figure 9) The
Test Dispense operation will start.
d. The Test Dispense command
instructs the dispenser to
dispense, minimum, one note from
each installed and operational
cassette into the reject vault. This
test exercises the dispenser without
sending notes to the exit.
e. After completion of the Test
Dispense, the following prompt is
displayed - “Test Dispense
Completed Successfully - Dispense
Count , A: (# of notes), B: #, etc
(Figure 10)
13. Follow the remaining steps to
perform a Test Dispense:
Figure 9. Enter # of notes.
Figure 10. Test dispense prompt..
NMD-50 D
ISPENSING
M
ECHANISM
I
NSTALLATION