Replacement parts, Single or starter unit adder unit – Tennsco Z-Line Heavy Duty Boltless Rack User Manual
Page 4

REPLACEMENT PARTS
REF.
NO.
PART NO.**
DESCRIPTION
1a
High Capcity Post
4
SUR-hh
1b
"T" Post
2
ZTP-hh
2
Front-to-Back Shelf Support
2
Front-To-Back Shelf Support
12" to 32" Shelf Depth
6
LRA-dd
12" to 32" Shelf Depth
6
LRA-dd
36" to 48" Shelf Depth
6
LRA-ddG
36" to 48" Shelf Depth
6
LRA-ddG
3
Left-To-Right Channel Beam
6
LRC-ww
3
Left-To-Right Channel Beam
6
LRC-ww
4
Front-To-Back Shelf Deck Support
***
SDS-dd
4
Front-To-Back Shelf Deck Support
***
SDS-dd
5a
Optional Decking–Particleboard
3
PB-wwdd
5a
Optional Decking–Particleboard
3
PB-wwdd
5b
Optional Decking–Wire
3
ZWD-wwdd
5b
Optional Decking–Wire
3
ZWD-wwdd
TO OBTAIN PROPER REPLACEMENT PARTS, PLEASE PROVIDE THE FOLLOWING INFORMATION:
Description of part(s) needed and part
Purchase Date
number(s) as shown in Parts List (above)
Your company name
Color (i.e. Medium Grey, etc.)
Contact person's name/address/phone number
Was item missing, or was it damaged?
Company the product was purchased from
Tennsco Corp., P.O. Box 1888, Dickson, TN 37056-1888
Voice: (800) 251-8184
Fax: (800) 722-0134
If requesting parts by telephone, ask for customer service and have as much of the above information ready as possible.
Or, if you prefer, you can fill out the parts replacement form at www.tennsco.com/replacement.cfm.
REF.
NO. DESCRIPTION
PART NO.**
SINGLE OR STARTER UNIT
ADDER UNIT
* Quantities apply to the basic 3-shelf unit only. If you have ordered additional shelf levels, quantities will vary accordingly.
** Where the suffix "ww", "dd", or "hh" is used in the part number, the width (ww), depth (dd) or height (hh) is substituted
in the part number. For example, for an 84" high Angle Post, the part number would be SUR-84.
*** LRCs ranging from 48"w to 60"w come with 1 SDS-dd; 72"w comes with 2 SDS-dd; 84"w to 96"w comes with 3 SDS-dd.
QTY.*
QTY.*
Tennsco makes every effort to ensure that all units ship complete and arrive undamaged. However, should your
unit contain missing or damaged parts, replacements may be obtained directly from us. To obtain proper
replacement parts, follow the instructions below, or fill out the form at www.tennsco.com/replacement.cfm.
SUR Upright
(Ref. No. 1a)
Front to Back Shelf Support
(Ref. No. 2)
Optional
Wire Decking
(Ref. No. 5b)
Left-To-Right
Channel Beam
(Ref. No. 3)
ZTP Upright
(Ref. No. 1b)
Front-To-Back Shelf Deck
Support (Ref. No. 4)
Optional
Particleboard Decking
(Ref. No. 5a)