Introduction – SnowEx SP-7000 Owners Manual User Manual

Page 3

Introduction

Record important machine information here for quick reference. The SP-7000 Serial Number is found on the Serial Number Plate, located
on the frame at the rear of the machine. The Control Serial Number is found on the bottom of the control pendant, by the plug; the Control
Module Serial Number is found on the surface of the circuit board.
Model ____________________________________________
Spreader Serial # _____________________________________
Control Serial #

_____________________________________

Control Module Serial #

______________________________

Date Purchased _____________________________________
Dealer where purchased
____________________________________________________

Model No. SP-7000

Serial No. 140410300001SP-7000

Manuf. 2014

Madison Heights, MI 48071 U.S.A.

1-800-725-8377 trynexfactory.com

This manual is intended to help you to get to know your SP-7000 Tow Pro spreader and how to operate it safely, correctly and economically.
If you observe these instructions, you will prevent hazards, reduce repair costs and breakdown times, and increase the reliability and service
life of the machine.
The manual must be read and used by every person who will be working with or on the machine for:

• Operation (including preparation, repair during operation, & clean-up)
• Repairs (maintenance, inspection, overhaul), and/or
• Transport.

All regulations for safety and proper working practice must be observed in addition to this manual and any applicable regulations for the
prevention of accidents. Should you lose your Owner’s Manual or would like extra copies, they can be obtained from your SnowEx dealer or
retrieved from the SnowEx website – www. snowexproducts.com.

Example

SAFETY ALERT DEFINITION

This Safety Alert Symbol is used to pinpoint characteristics that, if not carefully followed, can create a safety hazard. When you
see this symbol in this manual or on the machine itself, BE ALERT – your safety and the safety of others is involved.

An accident will occur, resulting in Serious Injury or Death if the instructions are not followed.

An accident may occur, resulting in Serious Injury, perhaps Death, if the instructions are not followed.

An accident may occur, resulting in Minor or Moderate Injury if the instructions are not followed.

Important Information; Property or Equipment Damage may result if not followed.

IMPORTANT EQUIPMENT INFORMATION

Model # D5587

Serial # 1234

TRYNEX INTERNATIONAL

1-800-725-8377

SERIAL NUMBER DEFINITION

CODE

DEFINITION

2-Digit Year

2-Digit Month

2-Digit Date

2-Digit Location Code

####

4-Digit Sequential Number

PPPPP

5-Digit Assembly PN