Spreader maintenance – SnowEx SP-1225G User Manual
Page 8
© Trynex International 2011 (REV 001) L1102
5 – 8
Spreader Maintenance
Model # SP-725G/SP-1225G
• WARNING – When servicing is necessary, perform it in a protected area Do not use power tools in rain or snow because of danger of electrical
shock or injury. Keep area well lighted. Use proper tools. Keep the area of service clean to help avoid accidents.
• CAUTION – When replacing parts use only original manufacturer”s parts. Failure to do so will void warranty.
• Gently wash unit after each use to prevent material build-up and corrosion.
• Paint or oil all bare metal surfaces at the end of the season.
• After fi rst use, tighten all nuts and bolts on spreader and mount.
• WARNING: Never remove spreader with material in hopper.
• ATTENTION: Store control in cool dry place during the off season.