SnowEx SP-1225G - Manual (Page 7)

5 – 7 © Trynex International 2011 (REV 001) L1102
Operating the Spreader
(continued)
Model # SP-725G/SP-1225G
The purpose of the adjustable fi n is to provide a way to adjust spread patterns with different materials. You can select the desired position by
simply lifting up on the outside top edge. You will notice that diffrent materials act in different ways in relation to spinner speed. By moving
the fi ns you will be able to correct most pattern issues without having to sacrifi ce spinner speed. All adjustments should be made on pav-
ment and positions noted for future reference, this process should be incorporated into your normal calibration process.
Lift This End Up and
Move To Desired Position.
Adjustable Fins Shown in
Different Positions.