SnowEx SP-1225G - Manual (Page 6)

© Trynex International 2011 (REV 001) L1102 5 – 6
Operating the Spreader
Model # SP-725G/SP-1225G
SPREADER LOADING
WARNING – Do not overload vehicle. Use chart below to calculate weight of material. Weights of material are an average for dry
materials.
Material Weight Per Cubic Ft.
Rock Salt 80-90 lbs.
• Warning – Never leave material in hopper for long periods of time as salt is hygroscopic and will attract atmospheric moisture and harden up.
SPREADING TIPS
• Spread ice melters with the storm to prevent unmanageable levels of ice.
• Never exceed 10 m.p.h. when spreading.
• For a wider pass, increase speed.
• For a heavier pass, drive slower.
• Never operate spreader near pedestrians.
• Calculate spread pattern when near vegetation.
Gate Operation
1) To adjust the amount of material fl ow simply loosen knob and slide to the desired location and retighten knob. (see picture below)