Alpine TDM-7546E - Manual (Page 28)

28
English
In Case of Difficulty
Cause and Solution Symptom
•
No antenna or open connection in cable.
– Make sure the antenna is properly
connected; replace the antenna or cable
if necessary.
Unable to receive stations.
Radio Mode
Unable to tune stations in the seek mode.
•
You are in a weak signal area.
– Make sure the tuner is in the DX mode.
•
If the area you are in is a primary signal
area, the antenna may not be grounded and
connected properly.
– Check your antenna connections; make
sure the antenna is properly grounded at
its mounting location.
•
The antenna may not be the proper length.
– Make sure the antenna is fully extended;
if broken, replace the antenna with a new
one.
Broadcast is noisy.
•
The antenna is not the proper length.
– Extend the antenna fully; replace it if it is
broken.
•
The antenna is poorly grounded.
– Make sure the antenna is grounded
properly at its mounting location.
Output sounds dull.
•
The tape head needs cleaning.
– Clean the tape head.
Tape Mode