SnowEx SD-1400 Installation - Manual (Page 3)

3 © TrynEx International 2013 (REV B) F50729C
Introduction Introduction
These Installation Instructions have been designed to guide you while installing your Drop Pro Spreader. Follow these instructions with care
to ensure performance and longevity.
Please read and understand the safety warnings associated with the installation and assembly of the spreader before beginning. In addition
the safety information in these instructions, observe general safety guidelines to maintain your safety and the safety of those around you.
To install your Drop Pro you will need a set of wrenches, an assortment of drill bits and some wire cutters (to cut zip-ties).
THIS SIGN SHOULD ALERT YOU:
This Safety Alert Symbol is used to pinpoint characteristics that, if not carefully followed, can create a safety
hazard. When you see this symbol in this manual or on the machine itself, be alert – your safety and the
safety of others is involved.
Defined below are the Safety Alert Messages.
DANGER
Information that, if not carefully followed, can cause death.
WARNING
Information that, if not carefully followed, can cause serious personal injury or death.
CAUTION
Information that, if not carefully followed, can cause minor injury or damage to equipment.
IMPORTANT
This symbol is used to call out information that is important to follow carefully.