Calibration – Seed Hawk GRANULAR AND LIQUID TANKS 2008 User Manual

Page 29

Text mode
Original mode

CALIBRATION

There is a funnel provided that hangs on the bottom of the meter you are calibrating. First
take off the bottom plate of the meter and slide on the funnel. Set the Seed Hawk pail under
the funnel to catch your product. FIG 4.

NOTE:

Prime your roller before proceeding to turn the crank handle to meter out product.

NOTE:

When weighing your pail with product, ensure the pail is zeroed out prior to
metering product.

FIG 4

Note: Tank 1 is always the rear tank regardless of TBH, TBT, or On-Board