Seca 878 - Manual (Page 16)

16
5. Operation
Controls and displays
How to weigh properly
– Press the start key with no load on the
scale.
SE(A
,
8.8.8.8.8.
and
0.00
appear con-
secutively in the display. The scale is
then automatically set to zero and ready
for use.
– Ask the patient to mount the scale.
Once on the scale, the patient should
stand still.
– Read off the weighing result on the
digital display.
– If a load greater than 200 kg is placed
on the scale, St0P appears in the dis-
play.
– To switch off the scale, press the start
key again.
Automatic switch-off/stand-by mode
If no further weighing operations are performed, the scale switches off automatically after
a certain time:
in normal mode:
after 3 minutes
with the 2 in 1 function switched on: after 2 minutes
start key ON-OFF switch hold/2 in 1 key
kg
St0p