SANDPIPER M30 Non-Metallic - Manual (Page 8)

m30nmdl2sm-rev0713 Model S30 Non-Metallic Page 6
Dimensions: M30 Non-Metallic
with Spill Containment
Dimensions in Inches
Dimensional tolerance: ± 1 /
8
"
DISCHARGE PORT
3” STANDARAD 125# FLANGE CONFIGURATION
3/4” DIA., (4) HOLES EQUALLY SPACED
ON A 6” DIA. BOLT CHANGE.
MANIFOLD CAN
ROTATE ±90º
FROM VERTICAL
CENTERLINE
BOLT PATTERN IS
SYMMETRICAL ABOUT
CENTERLINES
AIR INLET
3/4” NPT
3/4” TYP.
8 PLACES
BOTTOM VIEW
SIDE VIEW
FRONT VIEW
SUCTION PORT
3” STANDARAD 125# FLANGE CONFIGURATION
3/4” DIA., (4) HOLES EQUALLY SPACED
ON A 6” DIA. BOLT CHANGE.
STANDARD INTEGRAL MUFFLER:
1” NPT EXHAUST PORT
FOR OPTIONAL MUFFLER
STYLES OR PIPING EXHAUST
AIR IN SUBMERGED APPLICATIONS
Dimension
Standard Pump A B
6 9/16"
6 9/16"
Pulse Output Kit
Sound Dampening Muffler
Mesh Muffler
12 11/16"
12 11/16"
13 3/4" 22 9/32"
8 13/16" 14 15/16"
Note: Porting Flanges are also available with
PN10 40mm DIN bolting configuration.
Note: Dimensions "B" is from
the opposite side of the pump
to the end of the muffler.
Note: Dimensions "A" is from
the vertical center line to the
end of the muffler.