SANDPIPER M10 Non-Metallic - Manual (Page 3)

M10nmdl1sm-rev0513 Models M10 Non-Metallic Page 1
Santoprene ® Injection molded thermoplastic elastomer with no fabric layer. Long mechanical flex 275°F -40°F 50° to 212°F
life. Excellent abrasion resistance. 135°C -40°C 10°C to 100°C
PTFE Chemically inert, virtually impervious. Very few chemicals are known to react chemically with
Teflon: molten alkali metals, turbulent liquid or gaseous fluorine and a few fluoro-chemicals such as 220°F -35°F 50°F to 212°F
chlorine trifluoride or oxygen difluoride which readily liberate free fluorine at elevated temperatures. 104°C -37°C 10°C to 100°C
PVDF 250°F 0°F
121°C -18°C
Polypropylene 180°F 32°F
82°C 0°C
Quality System
ISO9001 Certified
Environmental
Management System
ISO14001 Certified
M10
Non-Metallic
Design Level 1
Ball Valve
Air-Operated
Double Diaphragm Pump
ENGINEERING, PERFORMANCE
& CONSTRUCTION DATA
CE
U.S. Patent #
5,851,109; 5,996,627;
400,210 & 6,241,487
Other U.S. Patents
Applied for
Materials
Maximum* Minimum* Optimum**
*Definite reduction in service life.
**Minimal reduction in service life at ends of range.
Operating Temperatures
For specific applications, always consult “Chemical Resistance Chart” Technical Bulletin
MARATHON ® pumps are designed to be powered only by compressed air.
INTAKE/DISCHARGE PIPE SIZE CAPACITY
0 to 23 US gallons per minute
(0 to 87 liters per minute)
AIR VALVE
No-lube, no-stall
design
SOLIDS-HANDLING
Up to .15 in. (4mm)
HEADS UP TO
100 psi or 231 ft. of water
(7 bar or 70 meters)
DISPLACEMENT/STROKE
.026 US gallon / .098 liter
CAUTION! Operating temperature limitations are as follows:
Polyurethane 210°F
99°C
-40°F
-40°C
-40°F to 210°F
-40°C to 99°C
1" ANSI Flange
Nylon
180°F
82°C
32°F
0°C
FKM (Fluorocarbon): Shows good resistance to a wide range of oils and solvents; especially all aliphatic,
aromatic and halogenated hydrocarbons, acids, animal and vegetable oils. Hot water or hot aqueous
solutions (over 70°F) will attack FKM.
350°F
177°C
-40°F
-40°C
®
A WARREN RUPP PUMP BRAND