SANDPIPER SET2-A - Manual (Page 6)

Page 6 Model SET2-A Type 3 520-117-000 5/99
REPAIR PARTS LIST AND DRAWING
Sanitary Type 3
1 070-006-170 Bearing, Sleeve 2
2 114-005-332 Bracket, intermediate 1
3 720-004-360 Seal, U-cup 2
4 135-008-000 Bushing, Threaded w/O-Ring 2
5 620-004-114 Plunger, Actuator 2
6 095-073-000* Body Assembly, Pilot Valve 1
7 360-041-425 Gasket, Valve Body 1
8 560-001-360 O-Ring (included in item 4) 2
9 095-047-332 Body, Valve 1
10 132-014-358 Bumper, Valve Spool 2
11 165-011-332 Cap, End 2
12 360-048-425 Gasket, Valve Body 1
13 360-010-425 Gasket, End cap 2
14 560-020-360 O-ring 6
15 031-012-000 Sleeve & Spool Set 1
16 170-032-115 Capscrew, Hex Head 8
17 170-045-115 Capscrew, Hex Head 4
18 132-002-360 Bumper, Diaphragm 2
19 196-068-332 Chamber, Inner 2
20 286-005-366 Diaphragm 2
21 560-022-360 O-ring 2
22 685-007-120 rod, Diaphragm 1
23 478-007-115† Knob, Locking 16
24 170-024-115 Capscrew, Hex Head 8
25 618-003-110 Plug Pipe 2
26 900-006-115 Washer, Lock 16
27 612-052-157 Plate, Diaphragm 2
28 612-097-111 Plate, Outer 2
29 807-026-115 Stud 2
30 518-094-110 Manifold, Suction 1
31 518-093-110 Manifold, Discharge 1
32 722-040-600 Seat, Valve 4
33 050-018-600 Ball, check Valve 4
34 542-007-000 Stud Nut Assembly 8
35 132-022-360 Bumper, Actuator 2
36 902-003-000 Stat-O-Seal 2
37 200-032-115 Clamp, Discharge 2
38 200-034-115 Clamp, Suction 2
39 542-002-114 Nut, Stud 4
41 196-070-111 Chamber, Outer 2
42 530-008-000 Muffler, Exhaust 1
43 312-057-111 Elbow, Suction 2
iTEM TOTAL
NO. PArT NUMBEr DEScriPTiON rQD.
Repair Parts shown in bold face (darker)
type are more likely to need replacement
after extended periods of normal use. They
are readily available from most Warren Rupp
distributors. The pump owner may prefer to
maintain a limited inventory of these parts
in his own stock to reduce repair downtime
to a minimum.
iMPOrTANT: When ordering repair
parts always furnish pump model number,
serial number and type number.
MATERIAL CODES
The Last 3 Digits of Part Number
000...Assembly, sub-assembly; and some purchased
items
010...Cast Iron
015...Ductile Iron
025...Music Wire
080...Carbon Steel, AISI B-1112
100...Alloy 20
110...Alloy Type 316 Stainless Steel
111…Electropolished Stainless Steel
112...Alloy ‘‘C’’
114...303 Stainless Steel
115...302/304 Stainless Steel
120...416 Stainless Steel (Wrought Martensitic)
148...Hardcoat Anodized Aluminum
150...6061-T6 Aluminum
151...6063-T6 Aluminum
154...Almag 35 Aluminum
155 or 156...356-T6 Aluminum
157...Die Cast Aluminum Alloy #380
159...Anodized Aluminum
162...Brass, Yellow, Screw Machine Stock
170...Bronze, Bearing Type, Oil Impregnated
180...Copper Alloy
330...Plated Steel
331...Chrome Plated Steel
332...Electroless Nickel Plated
335...Galvanized Steel
356...Injection Molded Hytrel
357...Rupplon (Urethane Rubber)
360...Buna-N Rubber. Color coded: RED
363...Viton (Fluorel). Color coded: YELLOW
364...E.P.D.M. Rubber. Color coded: BLUE
365...Neoprene Rubber. Color coded: GREEN
366...Food Grade Nitrile. Color coded: WHITE
375...Fluorinated Nitrile
405...Cellulose Fibre
408...Cork and Neoprene
425...Compressed Fibre
440...Vegetable Fibre
500...Delrin 500
501...Delrin 570
520...Injection Molded PVDF, Natural Color, Food
Grade/USDA Acceptable
540...Nylon “Foodgrade”
550...Polyethylene
551...Polypropylene
555...PVC
580...Ryton
600...Teflon (virgin material) Tetrafluoroethylene (TFE)
603...Blue Gylon
604...Teflon, Diaphragm
610...Teflon Encapsulated Silicon
611...Teflon Encapsulated Viton
632...Neoprene Rupplon
633...Viton/Teflon
634...EPDM/Teflon
635… Neoprene/Teflon
636...White Nitrile/Teflon
637…Viton
Model SET2-A
WARREN RUPP, INC. A Unit of IDEX Corporation • P.O. Box 1568 • Mansfield, Ohio 44901 USA • (419) 524-8388 Fax (419) 522-7867
* Available only in kit form. Order P/N 031-055-000 which also includes
items 5,7,12 & 35
†
NOTE: Items 23 and 49 MUST be torqued to 430 in./lbs. before
operating pump.