Actiontec electronic Dual PC Modem R7000M - Manual (Page 24)

21
Chapter 3 Basic Setup
Dial X To Disable Call Waiting
Activate this option (by clicking in the check box) to disable call waiting, then
enter the numbers that disable call waiting in the text box after “Dial.” If call
waiting is left enabled, when someone calls on the same line on which the
Modem is connected, the Modem will disconnect. After disabling call waiting,
incoming caller will hear a busy signal.
5. When finished with the “Dial Configuration” screen, click Next. The “Save
Configuration” screen appears. Click Save and Restart to save the Modem’s
settings.
6. The “Congratulations” screen appears. The Modem is successfully configured.