RIKON Power Tools 70-425 - Manual (Page 5)

5
Unpacking and Clean-up
1. Carefully finish removing all contents from shipping cartons. Compare contents of the shipping
cartons with the list of contents above. Place parts on a protected surface.
2. Report any shipping damage to your local distributor.
3. Clean all rust protected surfaces with kerosene or diesel oil. Do not use; gasoline, paint
thinner, mineral spirits, etc. These may damage painted surfaces.
4. Set packing material and shipping cartons to the side. Do not discard until machine has been
set up and is running properly.
Contents of Package
The 70-425 Woodfast lathe is shipped in two cartons. Unpack the lathe from both cartons and check
to see that you have all of the following items. Do not turn your machine ON if any of these items are
missing. You may cause injury to yourself or damage to your machine.
Unpacking and Checking Contents
A. Lathe Bed
B. Stand Body (2pcs)
C. Stand leg (2pcs)
D. Wrench (2pcs)
E. Knockout Bar
F. 12” Tool Rest
G. 6” Tool Rest
H. Loose parts bag
I. Instruction Manual
A
B
C
D
E
F
G
H I