Maschio Gaspardo LELIO - Manual (Page 11)

TWO WORKING WIDTH ADJUSTMENT SYSTEMS AVAILABLE:
STEP BY STEP
The working width of each ploughshare can be set manually over 5 steps, pivo ng the bodies around the
beam supports. In this way, each body width can be increased by 5 cm from 30 to 50 cm adap ng the
plough to any condi ons (residues, soil condi ons, tractor, etc.).
VARIO SYSTEM
Using a double-ac ng hydraulic cylinder, each furrow width can be set con nuously from 25 to 60 cm. By
a parallelogram connec on system, the furrows, the dra point and the depth wheel are automa cally
adjusted at the same me when the working width is changed.
11