LT Security LTD911M6KIT2 - Manual (Page 6)

User Manual
5
Chapter 3: Installation
3.1 Install Hard Disk
NOTICE
:
Don’t take out HDD when DVR is running.
(1)
Remove the screws around the top cover.
(2) Remove the top cover carefully.
(3) Connect the power cord and data cable to hard disk carefully.
(4) Use the provided screws to fix hard disk on the rack inside and then replace the
top cover of the case.
3.2 Connecting Camera and Monitor
There are 9 camera inputs and 1 Monitor output with BNC connectors (Refer to 2.2
Rear Panel).
3.3 VGA Output
There is 1 CRT or LCD monitor output with VGA port.
3.4 Connecting Power Supply
Please only use the power adapter supplied with the DVR.
Chapter 4: Starting the DVR
4.1 Firmware Version
After connecting the power adapter
and turning on the power button, the system
will boot-up and display the version and
released date of the DVR firmware.
2008.5.5
V 2.3
V-MLANG