LT Security LTD7926 - Manual (Page 27)

Digital Video Recorder User Manual
21
Step5: click “default” button to resort default setting;
click “apply” button to save the setting; click “exit”
button to exit current interface.
Fig 4-8 live configuration-host monitor
4.2.3 Spot
Step1: enter into system configuration live configuration Spot; refer to Fig 4-9:
Step2: select split mode: 1
×1and channel
Step3: dwell time: the time interval for a certain dwell
picture display switching to next dwell picture display
Step4: selected the split mode, then setup current
picture group. Click button to setup the previous
channel groups of dwell picture; click button to
set the latter channel groups of dwell picture.
Step5: click “default” button to resort default setting;
click “apply” button to save the setting; click “exit”
button to exit current interface
Fig 4-9 live configuration-Spot
4.2.4 Mask
User can setup private mask area on the live image picture, max threes areas.