Lincoln Electric IM747 SA 250 - Manual (Page 8)

A-1 INSTALLATION
SA-250
A-1
Make/Model Description Horsepower Operating Displacement cu. in.(ltrs) Starting Capacities
@ 1800RPM S PEED System
1. Output rating in watts is equivalent to volt-amperes at unity power factor. Output voltage is within ± 10% at all loads up to
rated capacity. When welding, available auxiliary power will be reduced.
* Based on a 10 min. period.
** Includes Top of Lift Bale.
TECHNICAL SPECIFICATIONS - SA-250 ( K1283-8)
INPUT - DIESEL ENGINE
RATED OUTPUT @ 104°F(40C°) - WELDER
HEIGHT WIDTH DEPTH WEIGHT
43.13** in. 28.00 in. 67.00 in.
1096.0 mm 711.2 mm 1702.0mm 1470 lbs. (667kg.)
LUBRICATION FUEL SYSTEM GOVERNOR
Full Pressure with Full Flow Filter Indirect Fuel Injector Mechanical Governor
Electrical Shutoff Solenoid
Mechanical Fuel Pump
AIR CLEANER ENGINE IDLER MUFFLER ENGINE PROTECTION
Low noise Muffler: Shutdown on low oil
Single Element Automatic Idler Made from long life, pressure and engine
aluminized steel. temperature.
RATED OUTPUT @ 104°F(40C°) - GENERATOR
Auxiliary Power 1
3,000 Watts Continuous, 60 Hz AC
26 Amps @115V
13 Amps @ 230V
PHYSICAL DIMENSIONS
ENGINE COMPONENTS
Perkins
104-22
4 Cylinder
4 Stroke
Naturally
Aspirated
Water
Cooled
Engine
32.7 HP
High
1800RPM
Full Load
1725RPM
Low Idle
1400RPM
135.6 (2.2)
12VDC Battery
and starter
Push Button
Starter
(650 Cold
crank amps)
Fuel: 15gal.(57L)
Oil: 8.7 qts.
(8.2L)
Radiator Coolant
9.5 qts.
(9.0L)
DESCRIPTION
300 Amp DC Welder
All Copper Windings
Pure DC Power Generator
RATED DC OUTPUT*
VOLTS @ RATED AMPS
30V @ 250A
32V @ 300A
98V DC Max. OCV @ 1800RPM
DUTY CYCLE
100%
60%
DC CURRENT RANGE
Fine Adjustment in each Range
40-350 AMPS
220-Max.
160-240
120-190
80-130
Min.-90