Lincoln Electric IM983 RED-D-ARC DC655e (CE) - Manual (Page 17)

B-2 OPERATION B-2
• Panel switches behind a latched front panel for
remote or local output control, output on or remote
selection, and CC, CV Sub-arc or CV MIG mode
selection.
• Panel knob settable CC arc force control with built-in
adjustable “Hot Start”.
• High efficiency output, and selectable “sleep mode”
idle mode timer which shuts down input power if not
used for extra energy conservation.
• Fan as needed (F.A.N.). Solid state thermally con-
trolled fan operates cooling fan only when required.
Minimizes power consumption, operating noise and
dust intake.
• Hinged cover to protect output terminals and auxil-
iary connections.
• Electronic and thermostatic protection for current
overload and excessive temperatures.
• 42 VAC, 10 amp auxiliary power available for the
wire feeder; circuit breaker protected.
• 115 VAC, auxiliary power protected by a 15 amp
breaker.
• 220 VAC receptacle for connecting to a water cooler.
Protected by 2 amp breaker.
• MS-type (6-pin) and (14-pin) connections for remote
and wire feeder.
• Optional Field Installed Digital or Analog
Voltmeter/Ammeter kits are available.
• Optional Dual Process Switch for two processes with
polarity change and electrical isolation.
WELDING CAPABILITY
The DC655e (CE) has the following Output and Duty
Cycle based on operation for a 10 minute period:
650 Amps, 44 Volts at 100%
815 Amps, 44 Volts at 60%
DC655e (CE) (RED-D-ARC)
GRAPHIC SYMBOLS THAT APPEAR ON
RATING PLATE (LOCATED ON CASE
BACK)
3 Phase transformer with
rectified DC output
INPUT POWER
THREE PHASE
GMAW
FCAW
Constant Voltage Output
Characteristics
Designates welder complies with
International Electrotechnical
Commission requirements 974-1.
IEC 974-1
Designates welder complies with
low voltage directive and with
EMC directive.
CE
Designates welder can be used
in environments with increased
hazard of electric shock.
S
SMAW
SAW
Constant Current Output
Characteristics
Designates the degree of envi-
ronmental protection provided by
the power sources enclosure.
IP-23
Open Circuit Output Voltage Uo
Input Voltage Rating(s) U1
Input Current Rating(s)
I1
Output Voltage Rating(s) U2
Output Duty Cycle Rating(s) X
Output Current Rating(s) I2