Lincoln Electric IM831 RANGER 3 PHASE - Manual (Page 23)

C-2 ACCESSORIES C-2
RANGER 3 PHASE
RECOMMENDED EQUIPMENT
STICK
K704 Accessory Kit which includes:
• Electrode Holder & Cable
• Work Clamp & Cable
• Headshield
WIRE FEED
LN-25
K449 LN-25 - Includes internal contactor for across
the arc operation (no control cable). Provides “cold”
electrode until gun trigger is pressed. Includes gas
solenoid. Requires Drive Roll Kit and Weld Power
Cable.
Magnum Gun and Magnum Gun Connector Kit are
required for gas-shielded welding. Innershield Gun is
required for gasless welding.
LN-15
K449 LN-15 - Includes internal contactor for across
the arc operation (no control cable). Provides “cold”
electrode until gun trigger is pressed. Includes gas
solenoid. Requires Drive Roll Kit and Weld Power
Cable.
Magnum Gun and Magnum Gun Connector Kit are
required for gas-shielded welding. Magnum
Innershield Gun and wire bushing is required for gas-
less welding.
TIG
Magnum™ TIG Torch
• K 26V 2 Cable Pro Torch
Magnum Parts Kit and Argon Gas
• K509 Parts Kit
K930-2 TIG Module (Requires)
• Requires K938-1 Contactor Kit,
• K936-4 Control Cable, and
• K814 Arc Start Switch
Optional TIG Module Accessory:
• K939-1 Docking Kit
• K937-45 Control Cable Extensions (45ft.)
• K844-1 Water Valve Kit