Lincoln Electric IM629 Mobiflex 100-NF Portable Fan - Manual (Page 10)

B-1 OPERATION B-1
Read and understand this entire section before oper-
ating your Mobiflex 100-NF Portable Fan.
SAFETY INSTRUCTIONS
Do not attempt to use this equipment until you have
thoroughly read all operating and maintenance man-
uals supplied with your equipment and any related
welding machine it will be used with. They include
important safety precautions, operating and mainte-
nance instructions and parts lists.
ELECTRIC SHOCK can kill.
• Do not touch electrically live parts such
as output terminals or internal wiring.
• Insulate yourself from the work and
ground.
• Always wear dry insulating gloves.
------------------------------------------------------------------------
WELDING SPARKS can cause fire or
explosion.
• Keep flammable material away.
• Do not weld upon containers which
have held combustibles.
------------------------------------------------------------------------
ARC RAYS can burn.
• Wear eye, ear and body protection.
------------------------------------------------------------------------
FUMES AND GASES
can be dangerous.
• Although the removal of the particu-
late matter from welding smoke may
reduce the ventilation requirement,
concentrations of the clear exhausted
fumes and gases may still be haz-
ardous to health. Avoid breathing
concentrations of these fumes and
gases. Use adequate ventilation
when welding. See ANSI Z49.1,
"Safety in Welding and Cutting", pub-
lished by the American Welding
Society.
------------------------------------------------------------------------
Only qualified personnel should operate this equip-
ment.
ADDITIONAL SAFETY PRECAUTIONS
Always operate this equipment with the filter and arm
installed and all covers in place as these provide max-
imum protection from moving parts and insure proper
vacuum operation and cooling air flow.
OPERATING INSTRUCTIONS
MOVING PARTS can injure.
• Keep hands away from the suction and
outlet openings. The Mobiflex 100-NF
must never be used without the Hose
and Hood Set.
------------------------------------------------------------------------
Plug input cord into 120 VAC input power and turn on.
Note: 0 = off, 1 = on.
Position hood within 10-15 inches (250-300mm) of the
welding arc.
MOBIFLEX 200-M
WARNING
CAUTION