Lincoln Electric IM502 LN-742H Wire Feeder - Manual (Page 32)

C-6 ACCESSORIES C-6
DRIVE ROLL KITS
Table C-2 lists the appropriate drive roll kits for each
type of wire used.
LN-742 & LN-742H
2-Roll 4-Roll
Steel Wire Sizes
0.068-3/32 in. (1.7-2.4 mm) Cored
KP653-3/32C** KP655-3/32C*
1/16 in. (1.6 mm) Cored or Solid KP653-1/16** KP655-1/16*
0.045-0.052 in. (1.2-1.3 mm) Solid KP653-052S KP655-052S
0.045-0.052 in. (1.2-1.3 mm) Cored KP653-052C KP655-052C
0.035 in. (0.9 mm) Solid KP653-035S KP655-035S
0.035 in. (0.9 mm) Cored KP653-035C KP655-035C
0.030 in. (0.8 mm) Solid KP653-030S KP655-030S
0.023-0.025 in. (0.6 mm) Solid KP653-025S KP655-025S
Aluminum Wire Sizes*
1/16 in. (1.6 mm)
KP688-1/16A KP647-1/16A
3/64 in. (1.2 mm) KP688-3/64A KP647-3/64A
0.035 in. (0.9 mm) KP688-040A KP647-040A
TABLE C.2 – DRIVE ROLL KIT NUMBERS.
* For use with Binzel European Guns L9933 Installation instructions are included.
** Not for use with, LN-742H model.